{"id":10132,"date":"2026-04-20T07:14:48","date_gmt":"2026-04-20T07:14:48","guid":{"rendered":"https:\/\/www.sipconinstrument.com\/blog\/?p=10132"},"modified":"2026-05-22T07:18:43","modified_gmt":"2026-05-22T07:18:43","slug":"why-your-measurements-are-inconsistent-and-how-to-fix-it","status":"publish","type":"post","link":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/","title":{"rendered":"Why Your Measurements Are Inconsistent (And How to Fix It)"},"content":{"rendered":"

Why is measurement inconsistent<\/strong> even when everything looks correct?<\/p>\n

You run a test, the result looks stable, and nothing seems wrong. Then you repeat it, and the value differs slightly. On another day, with another operator, it is different again. This is where the real question begins \u2013 why is measurement inconsistent, even when the process seems to be working fine.<\/p>\n

In most cases, inconsistencies in measurement<\/strong> are not random. They enter the picture usually unbeknownst to you through the way measurements are prepared, performed, and interpreted. These are not obvious errors, which is why they continue for a long time without being noticed.<\/p>\n

If you look closely, what appears as variation is often a pattern. This pattern usually traces back to a set of measurement mistakes that have seeped into your daily practices.<\/p>\n

Why is measurement inconsistent in real lab conditions<\/h2>\n

In theory, measurement systems are designed to be repeatable. In practice, there are different big and small factors that keep on interfering with your measurement system.<\/p>\n

Operator judgment<\/strong> is one of the first. When measurements are taken visually and manually, results differ from person to person. Over time, this creates inconsistencies in measurement that cannot be explained by the material alone.<\/p>\n

Sample preparation<\/strong> is another critical factor. For example, if a cable slice is not perfectly perpendicular, even a slight angle increases the measurement path, which makes the thickness appear higher than it actually is. So the cable may be correct, but the reading is not.<\/p>\n

Temperature<\/strong> also plays a role. Even small differences between the workpiece temperature and the measuring system temperature can result in micron-level differences, which affects repeatability more than most people expect.<\/p>\n

Then there are setup issues<\/strong>. In tensile testing, measurement errors may come from grip slippage, jaw cutting, or incorrect load cell selection, rather than any actual material difference.<\/p>\n

So when we ask again, why is measurement inconsistent, the answer is not one cause, but a combination of small, unmanaged factors.<\/p>\n

Common measurement mistakes that create inconsistencies in measurement<\/h2>\n

Once you see the causes, the measurement mistakes become easier to recognize, and many of them are part of routine work.<\/p>\n

    \n
  • Manual slicing that introduces angle variation.<\/li>\n
  • Poor sample preparation leading to deformation or unclear edges.<\/li>\n
  • Incorrect sample thickness in microscopic testing.<\/li>\n
  • Ignoring temperature differences between sample and lab.<\/li>\n
  • Improper setup in tensile testing, causing slip or localized damage.<\/li>\n<\/ul>\n

    In isolation, these may small variations. But when repeated, they create consistent inconsistencies in measurement<\/strong>, which are often mistaken for process variation.<\/p>\n

    This is also where many labs get a false sense of control. Average values may look acceptable, but as we know, failures do not begin at the average. They begin at the weakest point.<\/p>\n

    How to fix measurement mistakes in a controlled way<\/h2>\n

    Once the problem is clear, the next step is understanding how to fix measurement mistakes<\/strong> in a way that actually improves repeatability.<\/p>\n

    Start by reducing dependence on manual measurements<\/strong>. Automated, vision-based systems ensure that every sample is measured using the same method, which removes the anomalies that may be introduced by the operator.<\/p>\n

    Control sample preparation.<\/strong> Use proper slicing tools to ensure perpendicular cuts and consistent thickness. In microscopic testing, tools like microtomes help maintain uniformity and reduce differences in preparation.<\/p>\n

    Stabilize environmental conditions.<\/strong> Take measurements only when the workpiece and the measurement system are stable and the temperature is consistent.<\/p>\n

    Standardize your procedures.<\/strong> SOPs must be clearly defined and matched with IEC or IS standards, including setup conditions, calibration, and measurement methods.<\/p>\n

    When you look at how to fix measurement inconsistency, it becomes clear that improvement does not come from one change, but from controlling the entire system.<\/p>\n

    How to fix measurement inconsistency for audits and long-term control<\/h2>\n

    As mentioned before, these issues do not remain internal. They become visible during audits, customer checks, and failure analysis.<\/p>\n

    To address how to fix measurement inconsistency in a consistent manner, focus on these controls:<\/p>\n

      \n
    • Standardize the measurement method<\/strong>
      \nMake sure that all the operators follow the same SOP as per the standards.<\/li>\n
    • Control sample preparation<\/strong>
      \nMost measurement mistakes start here. Maintain proper slicing and uniform samples.<\/li>\n
    • Minimize operator-dependent judgment<\/strong>
      \nUse automated systems wherever possible to improve consistency.<\/li>\n
    • Maintain stable environmental conditions<\/strong>
      \nEven small temperature differences can affect accuracy.<\/li>\n
    • Use correct setup and equipment<\/strong>
      \nAvoid variations in setup, especially in tensile testing.<\/li>\n
    • Ensure traceability and documentation<\/strong>
      \nMaintain image-backed records for audit support.<\/li>\n
    • Adopt the 3RC approach<\/strong>
      \nMeasurements must be Repeatable, Recordable, and Reliable.<\/li>\n<\/ul>\n

      By implementing these controls, you can considerably reduce inconsistencies in measurement simply because you are not allowing variations to accumulate.<\/p>\n

      Bringing control back to your measurements<\/h2>\n

      Measurement variation is rarely accidental. Small, repeatable missteps in preparation, method, and control are usually the main culprits. Once these are identified, the system becomes more stable, and results become easier to trust.<\/p>\n

      This is where the right measurement approach, supported by the right tools, starts making a real difference. Camera-based profile projectors improve speed, reduce variation, and make measurements more reliable in real production conditions.<\/p>\n

      At Sipcon Technologies Pvt. Ltd., we focus on building systems that solve practical measurement challenges and support consistent, audit-ready results. If you are looking to improve accuracy and control in your process, you can rely on us.<\/p>\n","protected":false},"excerpt":{"rendered":"

      Why is measurement inconsistent even when everything looks correct? You run a test, the result looks stable, and nothing seems wrong. Then you repeat it, and the value differs slightly.<\/p>\n","protected":false},"author":1,"featured_media":10133,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-10132","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-articles"],"yoast_head":"\nWhy Your Measurements Are Inconsistent (And How to Fix It) - Sipcon<\/title>\n<meta name=\"description\" content=\"Learn why measurement results become inconsistent and how to fix common issues like calibration errors, operator mistakes, and setup problems\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Why Your Measurements Are Inconsistent (And How to Fix It) - Sipcon\" \/>\n<meta property=\"og:description\" content=\"Learn why measurement results become inconsistent and how to fix common issues like calibration errors, operator mistakes, and setup problems\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/\" \/>\n<meta property=\"og:site_name\" content=\"Sipcon\" \/>\n<meta property=\"article:published_time\" content=\"2026-04-20T07:14:48+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-22T07:18:43+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2026\/05\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"1000\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"pawan_w\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"pawan_w\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/\"},\"author\":{\"name\":\"pawan_w\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#\\\/schema\\\/person\\\/089be0894031dd266a29692d9cb07b89\"},\"headline\":\"Why Your Measurements Are Inconsistent (And How to Fix It)\",\"datePublished\":\"2026-04-20T07:14:48+00:00\",\"dateModified\":\"2026-05-22T07:18:43+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/\"},\"wordCount\":879,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg\",\"articleSection\":[\"Articles\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/\",\"url\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/\",\"name\":\"Why Your Measurements Are Inconsistent (And How to Fix It) - Sipcon\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg\",\"datePublished\":\"2026-04-20T07:14:48+00:00\",\"dateModified\":\"2026-05-22T07:18:43+00:00\",\"description\":\"Learn why measurement results become inconsistent and how to fix common issues like calibration errors, operator mistakes, and setup problems\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg\",\"contentUrl\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg\",\"width\":1920,\"height\":1000,\"caption\":\"Measurements Are Inconsistent\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/why-your-measurements-are-inconsistent-and-how-to-fix-it\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Why Your Measurements Are Inconsistent (And How to Fix It)\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/\",\"name\":\"Sipcon\",\"description\":\"Sipcon Blog - Measurement Solutions to Ensure Zero Rejection\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#organization\",\"name\":\"Sipcon\",\"url\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/01\\\/sipcon-logo.png\",\"contentUrl\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/01\\\/sipcon-logo.png\",\"width\":170,\"height\":68,\"caption\":\"Sipcon\"},\"image\":{\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/#\\\/schema\\\/person\\\/089be0894031dd266a29692d9cb07b89\",\"name\":\"pawan_w\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/6dce1333da7383463448742cdd58f88a611c49159e4db0b77e9383f06a13fc82?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/6dce1333da7383463448742cdd58f88a611c49159e4db0b77e9383f06a13fc82?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/6dce1333da7383463448742cdd58f88a611c49159e4db0b77e9383f06a13fc82?s=96&d=mm&r=g\",\"caption\":\"pawan_w\"},\"sameAs\":[\"http:\\\/\\\/sipconinstrument.com\\\/blog\"],\"url\":\"https:\\\/\\\/www.sipconinstrument.com\\\/blog\\\/author\\\/pawan_w\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Why Your Measurements Are Inconsistent (And How to Fix It) - Sipcon","description":"Learn why measurement results become inconsistent and how to fix common issues like calibration errors, operator mistakes, and setup problems","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/","og_locale":"en_US","og_type":"article","og_title":"Why Your Measurements Are Inconsistent (And How to Fix It) - Sipcon","og_description":"Learn why measurement results become inconsistent and how to fix common issues like calibration errors, operator mistakes, and setup problems","og_url":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/","og_site_name":"Sipcon","article_published_time":"2026-04-20T07:14:48+00:00","article_modified_time":"2026-05-22T07:18:43+00:00","og_image":[{"width":1920,"height":1000,"url":"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2026\/05\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg","type":"image\/jpeg"}],"author":"pawan_w","twitter_card":"summary_large_image","twitter_misc":{"Written by":"pawan_w","Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#article","isPartOf":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/"},"author":{"name":"pawan_w","@id":"https:\/\/www.sipconinstrument.com\/blog\/#\/schema\/person\/089be0894031dd266a29692d9cb07b89"},"headline":"Why Your Measurements Are Inconsistent (And How to Fix It)","datePublished":"2026-04-20T07:14:48+00:00","dateModified":"2026-05-22T07:18:43+00:00","mainEntityOfPage":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/"},"wordCount":879,"commentCount":0,"publisher":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#primaryimage"},"thumbnailUrl":"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2026\/05\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg","articleSection":["Articles"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/","url":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/","name":"Why Your Measurements Are Inconsistent (And How to Fix It) - Sipcon","isPartOf":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#primaryimage"},"image":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#primaryimage"},"thumbnailUrl":"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2026\/05\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg","datePublished":"2026-04-20T07:14:48+00:00","dateModified":"2026-05-22T07:18:43+00:00","description":"Learn why measurement results become inconsistent and how to fix common issues like calibration errors, operator mistakes, and setup problems","breadcrumb":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#primaryimage","url":"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2026\/05\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg","contentUrl":"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2026\/05\/Why-your-measurement-inconsistent-Blog-image-.jpg.jpeg","width":1920,"height":1000,"caption":"Measurements Are Inconsistent"},{"@type":"BreadcrumbList","@id":"https:\/\/www.sipconinstrument.com\/blog\/why-your-measurements-are-inconsistent-and-how-to-fix-it\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.sipconinstrument.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Why Your Measurements Are Inconsistent (And How to Fix It)"}]},{"@type":"WebSite","@id":"https:\/\/www.sipconinstrument.com\/blog\/#website","url":"https:\/\/www.sipconinstrument.com\/blog\/","name":"Sipcon","description":"Sipcon Blog - Measurement Solutions to Ensure Zero Rejection","publisher":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.sipconinstrument.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.sipconinstrument.com\/blog\/#organization","name":"Sipcon","url":"https:\/\/www.sipconinstrument.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.sipconinstrument.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2024\/01\/sipcon-logo.png","contentUrl":"https:\/\/www.sipconinstrument.com\/blog\/wp-content\/uploads\/2024\/01\/sipcon-logo.png","width":170,"height":68,"caption":"Sipcon"},"image":{"@id":"https:\/\/www.sipconinstrument.com\/blog\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.sipconinstrument.com\/blog\/#\/schema\/person\/089be0894031dd266a29692d9cb07b89","name":"pawan_w","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/6dce1333da7383463448742cdd58f88a611c49159e4db0b77e9383f06a13fc82?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/6dce1333da7383463448742cdd58f88a611c49159e4db0b77e9383f06a13fc82?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/6dce1333da7383463448742cdd58f88a611c49159e4db0b77e9383f06a13fc82?s=96&d=mm&r=g","caption":"pawan_w"},"sameAs":["http:\/\/sipconinstrument.com\/blog"],"url":"https:\/\/www.sipconinstrument.com\/blog\/author\/pawan_w\/"}]}},"_links":{"self":[{"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/posts\/10132","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/comments?post=10132"}],"version-history":[{"count":1,"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/posts\/10132\/revisions"}],"predecessor-version":[{"id":10134,"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/posts\/10132\/revisions\/10134"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/media\/10133"}],"wp:attachment":[{"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/media?parent=10132"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/categories?post=10132"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.sipconinstrument.com\/blog\/wp-json\/wp\/v2\/tags?post=10132"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}